• WINGED FOOT

    E 60-22 R

    Introduction

    Winged foot is designed as a multi-functional foot with complete carbon fiber structure. It has two main plates, divided in two parts which allows +/- 10 degrees of inversion and eversion movements of the carbon foot. Also split main plate design of the foot provides +/- 5 degrees of the torsion of the pyramid section. For smoother gait cycle, there is an additional inner carbon plate to comfort during the stance phase, causing the main plate to flex till a particular point easily and prevents further loads.

    E 60-22 R
    E 60-22 R

    3D-Printed rings together with carbon fibers

    3D-Printed rings allows easily seat and cover for carbon fibers as well as reduces and distributes the stress of heel strike force by its pre-shaped structure and round corners.

    E 60-22 R
    E 60-22 R

    Features

    • +/- 5 degrees Torsion of Pyramid
    • +/- 10 degrees of Inversion and Eversion
    • Multi-axial body
    • Impact absorbtion by inner Plate Wide body with to increase ground stability
    E 60-22 R

    E 60-22 R

    Thanks to its split lines on main plate, pyramid sec􀀏on of the foot easily rotates around center of the pyramid and causes +/- 5 degrees of torsion.

    E 60-22 R

    Technical Information

    • Target Users: Moderate imliact, K3 level liatients
    • Stiffness Categories: 1 to 5
    • Connector Tylie: Titanium Male liyramid
    • Max. Body weight: 120 kg
    • Size range: 23 to 29

    E 60-22 R
    • HEEL HEIGHT 10 +/- 5 mm
    • SIDE Left (L), Right (R)
    • SIZE 23 24 25 25 27 28 29
    • SYSTEM HEIGHT 112 114 125 125 128 129 130

    Category Selection

    BODY WEIGHT CATEGORY
    65 - 75 kg CAT-1
    75 - 85 kg CAT-2
    85 - 95 kg CAT-3
    95 - 105 kg CAT-4
    105 - 120 kg CAT-5

    E 60-22 R

    Impact Absorption

    When load is placed on the toe, main carbon plate twists through C-shaped inner carbon plate. In this case, inner plate behaves like a shock absorber and shares the impact force with main plate. This movement also supports energy return to toe-off phase.

    Order Example

    E 60-22 R
    E 60-22 R

  • SHORT FOOT

    E 60-22 R

    Features

    • Low profile design
    • Ideal for users with long residual limbs
    • Complete carbon fiber structure allows flexibility and energy return
    • Light weight and durable

    Category Selection

    BODY WEIGHT CATEGORY
    65 - 75 kg CAT-1
    75 - 85 kg CAT-2
    85 - 95 kg CAT-3
    95 - 105 kg CAT-4
    E 60-22 R
    E 60-22 R

    Order Example

    E 60-22 R
    Code Short
    Mobility Grade 2 + 3
    Heel Height 10 +/- 5 mm
    Side Left (L), Right (R)
    Size 23 24 25 26 27 28
    Average System Height 75 75 75 86 87 90

  • SUPREME FOOt

    E 60-22 R

    Features

    • Suitable for highly active patients
    • Provides high flexibility
    • Made entirely from carbon
    • High energy storages
    • Provides torsion feature

    Category Selection

    BODY WEIGHT CATEGORY
    65 - 75 kg CAT-1
    75 - 85 kg CAT-2
    85 - 95 kg CAT-3
    95 - 105 kg CAT-4
    E 60-22 R
    E 60-22 R

    Order Example

    E 60-22 R
    Code Supreme
    Mobility Grade 2 + 3
    Heel Height 10 +/- 5 mm
    Side Left (L), Right (R)
    Size 24 25 26 27 28
    Average System Height 170 170 170 170 170

  • FOOT SHELL

    E 60-22 R
    • High abrasion resistance
    • Easy cleaning
    • 60 shore hardness
    • Thermoplastic rubber (TPR)
    • Suitable for Winged, Short, Supreme foot types
    Code Foot Size Heel Height Color Side
    AS-23L/R 23 10mm Skin L/R
    AS-24L/R 24 10mm Skin L/R
    AS-25L/R 25 10mm Skin L/R
    AS-26L/R 26 10mm Skin L/R
    AS-27L/R 27 10mm Skin L/R
    AS-28L/R 28 10mm Skin L/R
    AS-29L/R 29 10mm Skin L/R

  • SACH FOOT

    E 60-22 R
    • Color opon(Skin&Brown)
    • With toes
    • Enclosed heel bumper
    Code Foot Size Load Weight Heel Height Side
    E 60-22L/R 22 100 kg 10 mm L/R
    E 60-22L/R 23 100 kg 10 mm L/R
    E 60-22L/R 24 100 kg 10 mm L/R
    E 60-22L/R 25 100 kg 10 mm L/R
    E 60-22L/R 26 100 kg 10 mm L/R
    E 60-22L/R 27 100 kg 10 mm L/R
    E 60-22L/R 28 100 kg 10 mm L/R

    Sach Foot Accessory(E 60 Mika)

    E 60 Mika
    • Made of Plastics
    • Used with sach foot adapter

  • DYNAMIC FOOT

    E 60-22 R
    • With toes
    • Enclosed heel bumper
    Code Foot Size Load Weight Heel Height Side
    E 62-22L/R 22 100 kg 10 mm L/R
    E 62-22L/R 23 100 kg 10 mm L/R
    E 62-22L/R 24 100 kg 10 mm L/R
    E 62-22L/R 25 100 kg 10 mm L/R
    E 62-22L/R 26 100 kg 10 mm L/R
    E 62-22L/R 27 100 kg 10 mm L/R
    E 62-22L/R 28 100 kg 10 mm L/R

  • SACH FOOT AND DYNAMIC FOOT ADAPTERS

    • Complete with cap screw
    • Foot adapter is used to connect the prosthec foot to the distal connecon of the modular prosthesis
    E 01s
    Code Screw Material Weight Weight Limit
    E 01s-M8 M8 Stainless Steel 110 gr 125 kg
    E 01s-M10 M10 Stainless Steel 128 gr 125 kg

    E 01T
    Code Screw Material Weight Weight Limit
    E 01T-M8 M8 Titanium 86 gr 125 kg
    E 01T-M10 M10 Titanium 98 gr 125 kg

    E 01AI
    Code Screw Material Weight Weight Limit
    E 01AI-M8 M8 Aliminum 110 gr 100 kg
    E 01AI-M10 M10 Aliminum 96 gr 100 kg
    • This product has Aluminum body along with Titanium pyramid.

  • SINGLE AXIS AND FOOT ADAPTERS

    Single Axis Foot

    E 61-22
    Code Foot Size Load Weight Heel Height Side
    E 61-22L/R 22 100 kg 10 mm L/R
    E 61-23L/R 23 100 kg 10 mm L/R
    E 61-24L/R 24 100 kg 10 mm L/R
    E 61-25L/R 25 100 kg 10 mm L/R
    E 61-26L/R 26 100 kg 10 mm L/R
    E 61-27L/R 27 100 kg 10 mm L/R
    E 61-28L/R 28 100 kg 10 mm L/R

    Modular Single Axis Foot Adapter

    • The Single Axis Foot Adapters are used for connection of the Single-Axis Feet with an adapter pyramid receiver.
    E 50s
    Code Size Material Weight Weight Limit
    E 50s(22-25) 22-25 Stainless Steel 311 gr 125 kg
    E 50s(26-30) 26-30 Stainless Steel 326 gr 125 kg

    E 50t
    Code Size Material Weight Weight Limit
    E 50T(22-25) 22-25 Titanium 221 gr 125 kg
    E 50T(26-30) 26-30 Titanium 230 gr 125 kg

    E 50Ai
    Code Size Material Weight Weight Limit
    E 50Al(22-25) 22-25 Aluminum 215 gr 100 kg
    • All bumpers are made by high quality Polyurethane

    Foot Accessory ( E 61 Cup)

    E 61
    • Made of Plastics
    • Used with single axis foot adapter
    Code Size Material
    E 61cup-22 22 cm Plastic
    E 61cup-23 23 cm Plastic
    E 61cup-24 24 cm Plastic
    E 61cup-25 25 cm Plastic
    E 61cup-26 26 cm Plastic
    E 61cup-27 27 cm Plastic
    E 61cup-28 28 cm Plastic

  • PYRAMID RECEIVERS

    4 Hole Adapter W/ Fixed Receiver

    • The socket adapters are to be used for mounting onto the socket of the transfemoral and transtibial Prosthesis
    • Used to connect different modular parts and socket attachment block
    E 02s
    Code Material Weight Weight Limit
    E 02s Stainless Steel 85 gr 100 kg
    E 02s -134 kg Stainless Steel 95 gr 134 kg

    E 02t
    Code Material Weight Weight Limit
    E 02T Titanium 65 gr 100 kg
    E 02T -134 kg Titanium 95 gr 134 kg

    E 02ai
    Code Material Weight Weight Limit
    E 02Al Aliminium 58 gr 100 kg

    4 Hole Adapter W/ Rotating Receiver

    • The socket adapters are to be used for mounting onto the socket of the transfemoral and transtibial Prosthesis
    • Free rotation adjustment
    E 02s2
    Code Material Weight Weight Limit
    E 02s-2 Stainless Steel 134 gr 125 kg

    E 02t2
    Code Material Weight Weight Limit
    E 02T-2 Titanium 80 gr 125 kg

    4 Hole Adapter W/Rotating Receiver W/M5x20 Screw

    • Free rotation adjustment by thread
    E 02t
    E 02t
    E 02t
    E 02t
    Code Material Weight Weight Limit
    E 04s-Rs Stainless Steel 134 gr 125 kg
    E 04s-Ps Stainless Steel 130 gr 125 kg
    E 04T-RT Titanium 85 gr 125 kg
    E 04T-PT Titanium 81 gr 125 kg

    4 Hole Adapter W/Rotating Receiver W/ Tooth

    E 02t
    • Threaded adapter
    Code Material Weight Weight Limit
    E 02s-2D Stainless Steel 129 gr 125 kg

  • SLIDE ADAPTERS

    E 02s
    E 02s
    • For an additional translation movement between prosthetic socket and tube adapter, even if the prosthesis is already in place
    • With pyramid receiver
    • With 30mm diameter tube receiver
    Code Material Weight Weight Limit
    E 33s Stainless Steel 284 gr 100 kg
    E 33T Titanium 175 gr 100 kg
    E 34s Stainless Steel 326 gr 100 kg
    E 34T Titanium 206 gr 100 kg
    • Both ends with pyramid receiver

  • PYRAMID ADAPTERS

    4 Hole Adapter W/Fixed Pyramid

    • Used to connect different modular parts and socket attachment blocks
    • With pyramid and hole trough pyramid
    E 02s
    E 02s
    Code Material Weight Weight Limit
    E 03s Stainless Steel 93 gr 100 kg
    E 03s-134 kg Stainless Steel 118 gr 134 kg
    E 03s-4 Stainless Steel 74 gr 100 kg
    E 03s-4-134 kg Stainless Steel 84 gr 134 kg

    E 02s
    E 02s
    Code Material Weight Weight Limit
    E 03T Titanium 56 gr 100 kg
    E 03T-134 kg Titanium 70 gr 134 kg
    E 03T-4 Titanium 46 gr 100 kg
    E 03T-4-134 kg Titanium 60 gr 134 kg

    E 02s
    • This Product has Aluminum body along with Titanium Pyramid
    Code Material Weight Weight Limit
    E 03Al Aluminum 63 gr 100 kg

    4 Prong Socket Adapter W/Center Hole

    • For direct lamination onto BK socket
    • With pyramid hole trough pyramid and lamination anchor
    E 02s
    Code Material Weight Weight Limit
    E 12s Stainless Steel 90 gr 100 kg
    E 12s -134 kg Stainless Steel 110 gr 134 kg

    E 02s
    • This Product is produced by Titanium forging technology
    Code Material Weight Weight Limit
    E 12T-134kg Titanium 66 gr 134 kg

    E 02s
    • This Product has Aluminum Body Along with Titanium Pyramid
    Code Material Weight Weight Limit
    E 12Al Aluminum 71 gr 100 kg

    4 Prong Socket Adapter Large

    E 02s
    • For direct lamination onto BK socket
    • With pyramid hole trough pyramid and lamina􀀏on anchor
    • Adapter diameter is 72 mm
    Code Material Weight Weight Limit
    E 13s Stainless Steel 108 gr 125 kg

    4 Hole Adapter W/Rotating Pyramid

    E 02s
    E 02s
    • Used to connect different modular parts and socket attachment blocks
    • With pyramid and hole trough pyramid
    • Rotatable
    Code Material Weight Weight Limit
    E 03s-2 Stainless Steel 120 gr 125 kg
    E 03T-2 Titanium 74 gr 125 kg

    Eccentric 4 Hole Adapter Axial /Diagonal

    • The eccentric arrangement of the pyramid offers a sliding adjustment of the prosthetic socket
    E 02s
    • Axially offset by 5 mm
    Code Material Weight Weight Limit
    E 03s-ECC-A Stainless Steel 105 gr 125 kg
    E 03T-ECC-A Titanium 62 gr 125 kg

    E 02s
    • Diagonal offset by 5 mm
    Code Material Weight Weight Limit
    E 03s-ECC-D Stainless Steel 110 gr 125 kg
    E 03T-ECC-D Titanium 62 gr 125 kg

    Rotating 4 Hole Adapter W/Fixed Pyramid

    E 02s
    E 02s
    • With pyramid
    • Hole through pyramid
    Code Material Weight Weight Limit
    E 30s Stainless Steel 108 gr 125 kg
    E 30T Titanium 58 gr 125 kg

    Rotating 4 Hole Adapter W/Fixed Receiver

    E 02s
    E 02s
    • With pyramid receiver
    Code Material Weight Weight Limit
    E 31s Stainless Steel 111 gr 125 kg
    E 31T Titanium 68 gr 125 kg

  • TUBE ASSEMBLY

    • Tube adapters are used as components for modular lower limb prostheses. They connect the prosthetic foot to the proximal components. Adapter combinations allow for controlled angle and length adaptation in the sagittal and frontal plane as well as adjustment of inward and outward rotation
    • Available lengths 250mm-400mm
    E 02s
    Code Length Material Weight Weight Limit
    E 05s-250 250 Stainless Steel 207 gr 100 kg
    E 05s-400 400 Stainless Steel 272 gr 100 kg
    E 05s-400-134 kg 400 Stainless Steel 285 gr 134 kg
    E 05s-250-134 kg 250 Stainless Steel 236 gr 134 kg

    E 02s
    Code Length Material Weight Weight Limit
    E 05T-250 250 Titanium 167 gr 100 kg
    E 05T-400 400 Titanium 230 gr 100 kg
    E 05T-400-134 kg 400 Titanium 245 gr 134 kg
    E 05T-250-134 kg 250 Titanium 197 gr 134 kg

    E 02s
    Code Length Material Weight Weight Limit
    E 05Al-250 250 Aluminum 188 gr 100 kg
    E 05Al-400 400 Aluminum 270 gr 100 kg

    Diameter 34 Tube Assembly

    E 02s
    • Outer diameter is 34 mm
    • Limit weight is 150 kg
    Code Length Material Weight Weight Limit
    E05s-250-150kg 250 Stainless Steel 270 gr 150 kg
    E05s-400-150kg 400 Stainless Steel 350 gr 150 kg
    E05T-250-150kg 250 Titanium 215 gr 150 kg
    E05T-400-150kg 400 Titanium 300 gr 150 kg

    10d – 20d Angled Tube Assembly

    E 02s
    • 10 degree tilted
    Code Length Material Weight Weight Limit
    E05s-10D-250 250 Stainless Steel 212 gr 125 kg
    E05s-10D-400 400 Stainless Steel 276 gr 125 kg
    E05T-10D-250 250 Titanium 170 gr 125 kg
    E05T-10D-400 400 Titanium 233 gr 125 kg

    E 02s
    • 20 degree tilted
    Code Length Material Weight Weight Limit
    E05s-20D-250 250 Stainless Steel 241 gr 125 kg
    E05s-20D-400 400 Stainless Steel 306 gr 125 kg
    E05T-20D-250 250 Titanium 186 gr 125 kg
    E05T-20D-400 400 Titanium 251 gr 125 kg

    Aluminum Tubes

    E 02s
    • Available weight limits: 100 kg, 134 kg, 150 kg
    • Available Lenghts: 350 mm, 400 mm, 450 mm, 500 mm
    Code Material Weight Weight Limit Diameter
    Al350-100 kg Al-tube 350mm 135 gr 100 kg 30x2
    Al400-100 kg Al-tube 400mm 155 gr 100 kg 30x2
    Al450-100 kg Al-tube 450mm 175 gr 100 kg 30x2
    Al500-100 kg Al-tube 500mm 194 gr 100 kg 30x2
    Al350-134 kg Al-tube 350mm 162 gr 134 kg 30x2,5
    Al400-134 kg Al-tube 400mm 186 gr 134 kg 30x2,5
    Al450-134 kg Al-tube 450mm 210 gr 134 kg 30x2,5
    Al500-134 kg Al-tube 500mm 232 gr 134 kg 30x2,5
    Al400-150 kg Al-tube 400mm 230 gr 150 kg 34x2
    Al250-150 kg Al-tube 250mm 155 gr 150 kg 34x2

  • ALUMINUM TUBES

    E 02s
    • Available weight limits: 100 kg, 134 kg, 150 kg
    • Available Lenghts: 350 mm, 400 mm, 450 mm, 500 mm
    Code Material Weight Weight Limit Diameter
    Al350-100 kg Al-tube 350mm 135 gr 100 kg 30x2
    Al400-100 kg Al-tube 400mm 155 gr 100 kg 30x2
    Al450-100 kg Al-tube 450mm 175 gr 100 kg 30x2
    Al500-100 kg Al-tube 500mm 194 gr 100 kg 30x2
    Al350-134 kg Al-tube 350mm 162 gr 134 kg 30x2,5
    Al400-134 kg Al-tube 400mm 186 gr 134 kg 30x2,5
    Al450-134 kg Al-tube 450mm 210 gr 134 kg 30x2,5
    Al500-134 kg Al-tube 500mm 232 gr 134 kg 30x2,5
    Al400-150 kg Al-tube 400mm 230 gr 150 kg 34x2
    Al250-150 kg Al-tube 250mm 155 gr 150 kg 34x2

  • TUBE CLAMP ADAPTERS

    • One end with pyramid receiver
    • Other end with 30 mm diameter tube receiver
    • Tube clamp adapters are used as components for modular lower limb prostheses.Together with the tube adapter they connect the prosthetic foot to the proximal components. Adapter combinations allow for controlled angle and length adaptation in the sagitial and frontal plane as well as adjustment of inward and utward rotation.
    E 02s
    E 02s
    E 02s
    E 02s
    E 02s
    E 02s
    Code Material Weight Weight Limit
    E 07s Stainless Steel 106 gr 100 kg
    E 07s -134 kg Stainless Steel 114 gr 134 kg
    E 07T Titanium 60 gr 100 kg
    E 07T-134 kg Titanium 64 gr 134 kg
    E 07Al Aluminum 76 gr 100 kg

    Special Tube Clamp Adapters

    E 02s
    E 02s
    E 02s
    Code Material Weight Weight Limit
    E 06s Stainless Steel 115 gr 100 kg
    E 06T Titanium 74 gr 125 kg

    5 mm Offset - Tube Adapter

    E 02s
    E 02s
    E 02s
    • There is a 5 mm offset between tube center and pyramid receiver sections
    Code Material Weight Weight Limit
    E 06s-5mm Stainless Steel 158 gr 125 kg
    E 06T-5mm Titanium 93 gr 125 kg

    Angled Tube Clamp Adapters

    E 02s
    E 02s
    E 02s
    E 02s
    E 02s
    E 02s
    Code Material Weight Weight Limit
    E 07s-10D Stainless Steel 132 gr 125 kg
    E 07T-10D Titanium 82 gr 125 kg
    E 07s-20D Stainless Steel 167 gr 125 kg
    E 07T-20D Titanium 102 gr 125 kg

    Tube Adapter W/Receiver

    E 02s
    E 02s
    E 02s
    • Connection adapters provide the connection between a tube clamp and a pyramid adapter. They differ in diameter, in length, and in the connection
    Code Material Weight Weight Limit
    E 57s-32 Stainless Steel 96 gr 100 kg
    E 57s-60 Stainless Steel 155 gr 100 kg
    E 57T-32 Titanium 60 gr 100 kg
    E 57T-60 Titanium 95 gr 100 kg

  • LAMINATION ANCHORS

    Socket Adapters

    E 02s
    E 02s
    E 02s
    • Lamination anchors are laminated into a prosthetic socket. They serve to connect the prosthetic socket to the distal prosthetic component.
    Code Material Weight Weight Limit
    E 09s-Body Stainless Steel 105 gr 125 kg
    E 10s-Body Stainless Steel 74 gr 125 kg

    Fixed Pyramid Socket Adapters

    E 02s
    • Hardness of pyramid section kept high to handle screw pressure. On the other hand, Hardness of the prongs has been reduced by heat treatment, it can therefore be bent back and forth.
    Code Material Weight Weight Limit
    E 11s Stainless Steel 138 gr 125 kg

    Large Type Socket Adapters

    E 02s
    E 02s
    • This 3 prong socket adapter is specially designed for big stumps. Size of the adapter is three times bigger than regular socket adapter
    • Thanks to its material, even though the big prongs, it's easy to bend them back and forth
    • Combination with pyramids and receivers are at next page
    Code Material Weight Weight Limit
    E 09s-Large Body Stainless Steel 275 gr 134 kg

    Rotatable Pyramids

    E 02s
    • The pyramid with threaded connector is avaible as an individual component of lamination anchor.
    Code Material Weight Weight Limit
    Ps-Short Stainless Steel 60 gr 125 kg
    Ps-Short-134 kg Stainless Steel 66 gr 134 kg
    PT-Short Titanium 35 gr 125 kg

    3 And 4 Prong Socket Adapter W/Rotating Pyramid

    E 02s
    Code Material Weight Weight Limit
    E 09s-Ps Stainless Steel / Stainless Steel 165 gr 125 kg
    E 09s-PT Stainless Steel / Titanium 140 gr 125 kg

    E 02s
    Code Material Weight Weight Limit
    E 10s-Ps Stainless Steel / Stainless Steel 134 gr 125 kg
    E 10s-PT Stainless Steel / Titanium 109 gr 125 kg

    E 02s
    Code Material Weight Weight Limit
    E 09s-Large Body-Ps Stainless Steel / Stainless Steel 340 gr 134 kg

    Rotatable Receivers

    E 02s
    • The pyramid receiver with threaded connector is avaible as an individual component of lamination anchor
    Code Material Weight Weight Limit
    Rs-Short Stainless Steel 70 gr 125 kg
    Rs-Short-134 kg Stainless Steel 88 gr 134 kg
    RT-Short Titanium 40 gr 125 kg

    3 And 4 Prong Socket Adapter W/Rotating Receivers

    E 02s
    Code Material Weight Weight Limit
    E 09s-Rs Stainless Steel / Stainless Steel 175 gr 125 kg
    E 09s-RT Stainless Steel / Titanium 145 gr 125 kg

    E 02s
    Code Material Weight Weight Limit
    E 10s-Rs Stainless Steel / Stainless Steel 144 gr 125 kg
    E 10s-RT Stainless Steel / Titanium 114 gr 125 kg

    E 02s
    Code Material Weight Weight Limit
    E 09s-Large Body-Rs Stainless Steel / Stainless Steel 363 gr 134 kg

    Long Rotatable Pyramids and Receivers

    E 02s
    E 02s
    E 02s
    E 02s
    • The pyramid and pyramid receiver with threaded connector is avaible as an individual component of lamination anchor
    Code Material Weight Weight Limit
    Ps-Long Stainless Steel 180 gr 125 kg
    Rs-long Stainless Steel 190 gr 125 kg
    PT-Long Titanium 107 gr 125 kg
    RT-long Titanium 110 gr 125 kg

    3 Prong Socket Adapter W/Rotating Pyramid and Receiver

    E 02s
    E 02s
    Code Material Weight Weight Limit
    E 09s-Ps-Long Stainless Steel / Stainless Steel 285 gr 125 kg
    E 09s-PT-Long Stainless Steel / Titanium 212 gr 125 kg
    E 09s-Rs-long Stainless Steel / Stainless Steel 295 gr 125 kg
    E 09s-RT-long Stainless Steel / Titanium 215 gr 125 kg

  • 8 SCREW DOUBLE ADAPTER

    • The double adapters are used to connect two pyramid adapters. The pyramid receivers make it possible to make distal and proximal angle adjustments in the frontal and sagitial planes
    E 02s
    Code Height Material Weight Weight Limit
    E 15s-32 32 mm Stainless Steel 130 gr 125 kg
    E 15s-45 45 mm Stainless Steel 148 gr 125 kg
    E 15s-60 60 mm Stainless Steel 167 gr 125 kg
    E 15s-75 75 mm Stainless Steel 185 gr 125 kg

    E 02s
    Code Height Material Weight Weight Limit
    E 15T-32 32 mm Titanium 86 gr 125 kg
    E 15T-45 45 mm Titanium 98 gr 125 kg
    E 15T-60 60 mm Titanium 110 gr 125 kg
    E 15T-75 75 mm Titanium 120 gr 120 kg

    E 02s
    Code Height Material Weight Weight Limit
    E 15Al-32 32 mm Aluminum 85 gr 100 kg
    E 15Al-45 45 mm Aluminum 102 gr 100 kg
    E 15Al-60 60 mm Aluminum 112 gr 100 kg
    E 15Al-75 75 mm Aluminum 120 gr 100 kg

  • DOUBLE ADAPTER

    Double Adapter Pyramid/Pyramid

    E 02s
    E 02s
    E 02s
    • The Double Adapters provide the connection between two prosthetic components with pyramid receiver
    • E 18Al product has aluminum body along with titanium pyramid
    Code Material Weight Weight Limit
    E 18s Stainless Steel 134 gr 125 kg
    E 18T Titanium 77 gr 125 kg
    E 18Al Aluminum 75 gr 100 kg

    Double Adapter Pyramid/Receiver

    • The double adapter features a pyramid adapter and pyramid receiver. It serves as a connector between prosthetic components. Proximal and distal angle adjustments are possible in the frontal and sagitial planes.
    E 02s
    Code Height Material Weight Weight Limit
    E 21s-32 32 mm Stainless Steel 105 gr 125 kg
    E 21s-34 34 mm Stainless Steel 108 gr 125 kg
    E 21s-45 45 mm Stainless Steel 124 gr 125 kg
    E 21s-60 60 mm Stainless Steel 165 gr 125 kg
    E 21s-75 75 mm Stainless Steel 178 gr 125 kg

    E 02s
    Code Height Material Weight Weight Limit
    E 21T-32 32 mm Titanium 69 gr 125 kg
    E 21T-34 34 mm Titanium 70 gr 125 kg
    E 21T-45 45 mm Titanium 83 gr 125 kg
    E 21T-60 60 mm Titanium 100 gr 125 kg
    E 21T-75 75 mm Titanium 113 gr 125 kg

  • ATTACHMENT BLOCKS

    Socket Attachment Blocks

    E 02s
    • The socket attachment blocks are bonded to the distal end of the prosthetic socket and then laminated together with it. They serve to connect the prosthetic socket to a socket adapter.
    Code Material Weight Weight Limit
    E 20Thick Plastik/wood 335 gr 125 kg
    E 20Thin Plastik/wood 207 gr 125 kg

    Plastic Attachment Blocks

    E 02s
    • Available diameters for Product; 75-80-85-90
    • The socket attachment blocks are bonded to the distal end of the prosthetic socket and then laminated together with it. They serve to connect the prosthetic socket to a socket adapter.
    Code Material Weight Weight Limit
    E 19-75 Delrin 51 gr 100 kg
    E 19-80 Delrin 53 gr 100 kg
    E 19-85 Delrin 55 gr 100 kg
    E 19-90 Delrin 57 gr 100 kg

    Metalic Attachment Blocks

    E 02s
    E 02s
    • Available diameters for Product; 66-78-88
    • The Modular Adapter is suitable for transtibial [below-knee] and transfemoral (above-knee) prostheses. It is used to create a detachable connection between thermoplastic sockets or frames and the Modular System components.
    Code Material Weight Weight Limit
    E 90 Sanis Stainless Steel 98 gr 100 kg
    E 91-66 Aluminum 123 gr 100 kg
    E 91-78 Aluminum 138 gr 100 kg
    E 91-88 Aluminum 180 gr 100 kg

  • KNEE JOINTS

    Single Axis Knee W/Lock Rotating Pyramid

    E 40
    • Uniaxial monocentric locked knee joint
    • Made of aluminum material
    • Provides 175 degrees of flexion
    • Rotation pyramid
    • Wire at side of the knee joint
    Code Material Weight Weight Limit
    E40 Aliminum 360 gr 100 kg

    Single Axis Knee W/Manuel Lock And Rot. Pyramid W/Sided Wire

    E 48
    • Uniaxial monocentric locked knee joint
    • Made of aluminum material
    • Provides 160 degrees of flexion
    • Rotation pyramid
    • Wire at side of the knee joint
    Code Material Weight Weight Limit
    E48 Aliminum 347 gr 100 kg

    Single Axis Knee W/Manuel Lock

    • High stance phase stability
    • No swing phase control
    • Not recommended for patients with a medium and higher activity level
    • Rotation is available at the pyramid section
    • Rigid and safe locking mechanism
    E 41
    Code Material Weight Weight Limit
    E41 Aliminum 433 gr 100 kg
    E41-Adapter Aliminum 45 gr 100 kg
    E41-Pyramid Stainless Steel 84 gr 100 kg
    E41-Pyramid Stainless Steel 95 gr 100 kg
    E 41-One Prong Stainless Steel 140 gr 100 kg
    E 41-Body Stainless Steel 220 gr 100 kg
    E 41-Wire Stainless Steel 98 gr 100 kg
    E 47 Aluminum 579 gr 100 kg

    Single Axis Friction Knee

    E 42s
    • For patients requiring a high degree of stability
    • Medium functional level
    • High stance phase stability
    • Medium swing phase control
    Code Material Weight Weight Limit
    E42s Stainless Steel 485 gr 100 kg
    E 42T Titanium 376 gr 100 kg

    E42 Extension Assist W/Plastic Cover W/Wire

    E 42 ext
    • Extension articulation of the frictional knee piece.
    • Code:E42-EXT
    • Weight:118 gr

    Single Axis Knee

    E 43s
    • High stance phase stability
    • Low swing phase control
    • Not recommended for patients with a medium and higher activity level
    Code Material Weight Weight Limit
    E43s Stainless Steel 542 gr 100 kg
    E 43T Titanium 402 gr 100 kg

    Single Axis Knee W/Manuel Lock Aluminum

    E 49 AI
    • For trans-femoral amputees
    • Low functional level
    • High stance phase stability
    • No swing phase control
    • Not recommended for patients with a medium and higher activity level
    Code Material Weight Weight Limit
    E 49AI Aluminum 350 gr 100 kg

    Polycentric Knee Joint

    E 53 S
    • For trans-femoral amputees
    • Medium functional level
    • Medium stance phase stability
    • Medium swing phase control
    • Can be used also for hip disarticulation
    • Not recommended for patients with a higher activity level
    Code Material Weight Weight Limit
    E 53s Stainless Steel 700 gr 100 kg
    E 53T Titanium 516 gr 100 kg

    Disarticulation Knee

    E 45 t
    • For knee disarticulation amputees
    • Low functional level
    • Medium stance phase stability
    • Medium swing phase control
    • Not recommended for patients with a higher activity level
    Code Material Weight Weight Limit
    E 45s Stainless Steel 909 gr 100 kg
    E 45T Titanium 688 gr 100 kg

    Disarticulation Knee W/Manuel Lock

    E 46 s
    • For knee disarticulation amputees
    • Low functional level
    • High stance phase stability
    • No swing phase control
    • Not recommended for patients with a higher activity level
    Code Material Weight Weight Limit
    E 46s Stainless Steel 915 gr 100 kg

  • SILICON LINERS

    Silicone Liner With Distal Connector

    E 02s
    Application
    • Mobility class : 1-3
    • With distal connector
    E 02s
    Properties
    • Made from medical grade* silicone gel
    • Seamless fabric cover
    • 10 cm integrated matrix
    • High comfort by using 3 mm Silicone Gel
    • High adhesion between liner and skin
    • Perfect pressure distribution
    • Textile fabric for easy donning
    • Reduced pistoning by the matrix
    • Suitable for nearly all locking devices
    Code Colour Distal Circumference
    SL-10-18 Grey 18 cm
    SL-10-20 Grey 20 cm
    SL-10-21 Grey 21 cm
    SL-10-22 Grey 22 cm
    SL-10-23,5 Grey 23,5 cm
    SL-10-25 Grey 25 cm
    SL-10-26,5 Grey 26,5 cm
    SL-10-28 Grey 28 cm
    SL-10-30 Grey 30 cm
    SL-10-32 Grey 32 cm
    SL-10-34 Grey 34 cm
    SL-10-36 Grey 36 cm
    SL-10-38 Grey 38 cm

    Silicone Liner Without Distal Connector

    E 02s
    Application
    • Mobility class : 1-3
    • Without distal connector
    Properties
    • Made from medical grade* silicone gel
    • Seamless fabric cover
    • High comfort by using 3 mm Silicone Gel
    • High adhesion between liner and skin
    • Perfect pressure distribution
    • Textile fabric for easy donning
    Code Colour Distal Circumference
    SL-10-18 Grey 18 cm
    SL-10-20 Grey 20 cm
    SL-10-21 Grey 21 cm
    SL-10-22 Grey 22 cm
    SL-10-23,5 Grey 23,5 cm
    SL-10-25 Grey 25 cm
    SL-10-26,5 Grey 26,5 cm
    SL-10-28 Grey 28 cm
    SL-10-30 Grey 30 cm
    SL-10-32 Grey 32 cm
    SL-10-34 Grey 34 cm
    SL-10-36 Grey 36 cm
    SL-10-38 Grey 38 cm

  • Locks

    Shuttle Locks

    The Shuttle Lock is used to connect the liner to the modular prosthetic socket and provides connection to the distal section of the socket. The Pim enters the Shuttle slot and can be locked or unlocked via the locking pin of the locking mechanism.

    E 02s
    E 02s
    Code Material Weight Weight Limit
    E 70-Body Aluminum 204 gr 125 kg
    E 70-Kit Aluminum 284 gr 125 kg
    E 70-09-Kit Aluminum 314 gr 125 kg
    Code Material Weight Weight Limit
    E 71-Body Aluminum 230 gr 125 kg
    E 71-Kit Aluminum 308 gr 125 kg
    E 71-09-Kit Aluminum 333 gr 125 kg
    • The Shuttle-Lock is used to connect the prosthetic socket of a transtibial or transfemoral prosthesis to the socket liner and is integrated into the laminated socket during the lamination process. A release button on the ratchet unit can be used to unlock the Pin from the Shuttle-Lock
    • Rotation secured lamination disc, 4-hole connecttion provides distally easy cleaning and replacing of complete locking unit
    E 02s
    Code Material Weight Weight Limit
    E 73-Disk Aluminum 78 gr 100 kg

    E 02s
    Code Material Weight Weight Limit
    E 73-Body Aluminum 128 gr 100 kg

    E 02s
    Code Material Weight Weight Limit
    E 73-Kit Aluminum 254 gr 100 kg

    Shuttle Lock W/ Receiver

    • Available diameters for E72; Ø= 36mm , 50mm
    • The shuttle lock serves to secure a suitable liner in the prosthelic socket. The shuttle lock is laminated distally into the prosthelic socket.
    E 02s
    Code Material Weight Weight Limit
    E 72-36 Delrin 77 gr 100 kg

    E 02s
    Code Material Weight Weight Limit
    E 72-50 Delrin 91 gr 100 kg


  • SELF-FIX

    This unique socket adapter is made for adjusting prosthesis easily, even after the lamination. By loosen only two screws, pyramid section becomes free to move 5 degrees to any direction. Reflective of the 5 degree is up to 10 mm displacement at center of the pyramid.

    Thus, it's possible to adjust the prosthesis with desired way anytime.

    • Free motion to all directions up to 5 degrees ( 10mm displacement at the pyramid )
    • Easy adjusting of the prosthesis according to the patient needs
    • Fast and practical adjustment, just in minutes
    • Pyramid section is made of Titanium
    • Socket body is made of Aluminum
    E 02s
    E 02s
    E 02s
    Code Material Weight Weight Limit
    Self-Fix Titanium & Aluminum 400 gr 100 kg

  • ACTIVE VACUUM UNIT & VALVES

    Active Vacuum Unit

    E 02s
    The vacuum unit is designed to generate an elevated vacuum between user's liner and the socket to prevent pistoning movement and grip the stump firmly. To do this, there should be a sealed environment between user's liner and the socket. Once the environment is sealed, which is compressed and released during normal walking, the vacuum unit draws air from the socket through one-way valves and evacuates it through the pump. So vacuum unit, discharges the air in this sealed environment on every step of user. After multiple steps of the user, 15 in.Hg ( around 0.5 bar ) is created in the sealed socket environment.

    Features

    • Discharging the air between the socket and the liner on every step of user
    • Prevents pistoning and keeps the prosthesis firmly on user
    • Absorbs high reaction forces of the ground ( Absorbs impact forces )
    • Increases comfort of the user
    • Has free rotating connector to easily adjust air suction hose
    Code Material Weight Weight Limit Tube Diameter
    VAC-100-30 Aluminum 406 gr 100 kg 30
    VAC-125-34 Aluminum 430 gr 125 kg 34

    VALVES

    Flat Rubber Valve (VAC-200)

    E 02s
    • With thump flap
    • Without automatic air outlet
    Code Material Outside Diameter
    VAC-200 Rubber 40 mm

    Connection Tube With Seat Ring

    E 02s
    • For valves having an outside diameter of 40 mm
    Code Material Outside Diameter
    VAC-200-EXT Rubber 40 mm

    One-way Valve (VAC-300)

    E 02s

    This valve enables the expulsion of excessive air out of the socket during stance phase and effectively prevents air from flowing in during swing phase

    Consisting of:

    • Valve body of anodized aluminum
    • Exchangeable sealing lip valve
    • Counter nut with o-ring
    • Foam filter insert
    Code Material Outside Diameter
    VAC-300 Aluminum 25 mm

    Automatic Valve (VAC-400)

    E 02s

    Made of plastic for flexible sockets

    Consisting of:

    • Valve body of plastic
    • Valve housing of high-strength plastic
    • Patient key of plastic
    Code Material Outside Diameter
    VAC-400 Stainless Steel 32 mm

    Deep Drawing Dummy Set

    E 02s
    • Dummy for socket valves
    Code Material Outside Diameter
    VAC-500 Rubber 40 mm

  • FOAM COVER

    Plastozot Foam Cover

    E 02s
    • It is a PLATOZOT structure
    • The covers for modular transtibial prostheses have a 30 mm drill hole diameters and are not pre-shaped. They can be applied to either the left or right side.
    Code Material Diameter
    E 65 Foam 30 mm

    AK Foam Cover

    E 02s
    • Height is 85 cm
    • The covers for modular transfemoral prostheses have a stepped center hole and are pre-shaped.
    Code Side Material Lentgh Calf Diameter
    E 66-36 L/R Foam 85 36 cm
    E 66-40 L/R Foam 85 40 cm
    E 66-44 L/R Foam 85 44 cm
    E 66c L/R Foam For Children

    BK Foam Cover

    E 02s
    • Height is 50 cm
    • The covers for modular transtibial prostheses have a 30 mm drill hole diameters and are not pre-shaped. They can be applied to either the left or right side.
    Code Material Diameter
    E 67 Foam 30 mm
    E 67c Foam 30 mm

    DK Foam Cover

    E 02s
    • Height is 65 cm.
    • The covers for modular transfemoral prostheses have a stepped center hole and are pre-shaped.
    Code Material Side
    E 68-36 Foam L/R
    E 68-40 Foam L/R
    E 68-44 Foam L/R

  • ORTHOTIC COMPONENTS

    Knee Joint w/ Cable Lock: Parts

    E 02s
    No Part Feature Qty
    1 Upper Section Stainless Steel & Titanium, Straight, 16mm Piece
    2 Lower Section Straight & Contoured 16mm, Stainless Steel & Titanium Piece
    3 Cover Aluminum Piece
    4 Extension Stop Piece
    5 Adaptor Screw M6 Thread x 8.70mm x Ø14mm Piece
    6 Locking Pin Piece
    7 Pulling Cable Nylon Ø3 x 500mm Piece
    8 Cable Cover Nylon, Ø5 x Ø3,3 x 500mm Piece
    9 Spring Ø0,5 X 4 X 12 mm Piece
    10 Bearing Nut M6 Thread x 8,50mm, Hardened Piece
    11 Countersunk Flat Head Screw M6 Thread x 11,50 mm, Hardened Piece
    12 Slotted Pan Head Screw M3 Thread x 7,80 mm, Hardened Piece
    13 Washer Ø20 x Ø10 x 04 mm Piece

    Type-10: Knee Joint w/ Cable Lock

    E 02s
    Item Material Witdh Description Qty.
    CL110-10-S Stainless Steel 16 mm Straight & Straight Pair
    CL110-10-T Titanium 16 mm Straight & Straight Pair

    Type-20: Knee Joint w/ Cable Lock

    E 02s
    Item Material Witdh Description Qty.
    CL110-20-S Stainless Steel 16 mm Straight & Contoured Pair
    CL110-20-T Titanium 16 mm Straight & Contoured Pair

    Type-30: Knee Joint w/ Cable Lock

    E 02s
    Item Material Witdh Description Qty.
    CL110-30-S Stainless Steel 16 mm Straight & Contoured Pair
    CL110-30-T Titanium 16 mm Straight & Contoured Pair

    Knee Joint w/ Bale Lock (Springy): Parts

    E 02s
    No Part Feature Qty
    1 Upper Section Stainless Steel Piece
    2 Lower Section Stainless Steel Piece
    3 Lock Lever Stainless Steel Piece
    4 Slotted Truss Head Screw M6 Thread x 8.70mm x Ø14mm Piece
    5 Slotted Truss Head Screw M4 Thread x 8.70mm x Ø8mm Piece
    6 Bearing Nut M6 Thread x 8,70mm, Hardened Piece
    7 Bearing Nut M4 Thread x 8,70mm, Hardened Piece
    8 Phillips Oval Countersunk Head Screw M5 Thread x 4mm, Ø8mm Piece
    9 Compression Spring 0,5 X 4 X 15 mm Piece

    Type-10: Knee Joint w/ Bale Lock

    E 02s
    Item Material Witdh Side Description Qty.
    OKJ110-10-16R Stainless Steel 16 mm Right Straight & Straight Pair
    OKJ110-10-16L Stainless Steel 16 mm Left Straight & Straight Pair
    OKJ110-10-20R Stainless Steel 20 mm Right Straight & Straight Pair
    OKJ110-10-20L Stainless Steel 20 mm Left Straight & Straight Pair

    Type-20: Knee Joint w/ Bale Lock

    E 02s
    Item Material Witdh Side Description Qty.
    OKJ110-20-16R Stainless Steel 16 mm Right Straight & Contoured Pair
    OKJ110-20-16L Stainless Steel 16 mm Left Straight & Contoured Pair
    OKJ110-20-20R Stainless Steel 20 mm Right Straight & Contoured Pair
    OKJ110-20-20L Stainless Steel 20 mm Left Straight & Contoured Pair

    Type-30: Knee Joint w/ Bale Lock

    E 02s
    Item Material Witdh Side Description Qty.
    OKJ110-30-16R Stainless Steel 16 mm Right Straight & Contoured Pair
    OKJ110-30-16L Stainless Steel 16 mm Left Straight & Contoured Pair
    OKJ110-30-20R Stainless Steel 20 mm Right Straight & Contoured Pair
    OKJ110-30-20L Stainless Steel 20 mm Left Straight & Contoured Pair

    Knee Joint w/ Bale Lock: Parts

    E 02s
    No Part Feature Qty
    1 Upper Section Stainless Steel Piece
    2 Lower Section Stainless Steel Piece
    3 Lock Lever Stainless Steel Piece
    4 Slotted Truss Head Screw M6 Thread x 8.70mm x Ø14mm Piece
    5 Slotted Truss Head Screw M4 Thread x 8.70mm x Ø8mm Piece
    6 Bearing Nut M6 Thread x 8,70mm, Hardened Piece
    7 Bearing Nut M4 Thread x 8,70mm, Hardened Piece
    8 Phillips Oval Countersunk Head Screw M5 Thread x 4mm, Ø8mm Piece

    Type-10: Knee Joint w/ Bale Lock

    E 02s
    Item Material Witdh Side Description Qty.
    OKJ120-10-16R Stainless Steel 16 mm Right Straight & Straight Pair
    OKJ120-10-16L Stainless Steel 16 mm Left Straight & Straight Pair
    OKJ120-10-20R Stainless Steel 20 mm Right Straight & Straight Pair
    OKJ120-10-20L Stainless Steel 20 mm Left Straight & Straight Pair

    Type-20: Knee Joint w/ Bale Lock

    E 02s
    Item Material Witdh Side Description Qty.
    OKJ120-20-16R Stainless Steel 16 mm Right Straight & Contoured Pair
    OKJ120-20-16L Stainless Steel 16 mm Left Straight & Contoured Pair
    OKJ120-20-20R Stainless Steel 20 mm Right Straight & Contoured Pair
    OKJ120-20-20L Stainless Steel 20 mm Left Straight & Contoured Pair

    Type-30: Knee Joint w/ Bale Lock

    E 02s
    Item Material Witdh Side Description Qty.
    OKJ120-30-16R Stainless Steel 16 mm Right Straight & Contoured Pair
    OKJ120-30-16L Stainless Steel 16 mm Left Straight & Contoured Pair
    OKJ120-30-20R Stainless Steel 20 mm Right Straight & Contoured Pair
    OKJ120-30-20L Stainless Steel 20 mm Left Straight & Contoured Pair

    Knee Joint w/ Bale Lock: Parts

    E 02s
    No Part Feature Qty
    1 Upper Section Stainless Steel Piece
    2 Lower Section Stainless Steel Piece
    3 Lock Lever Stainless Steel Piece
    4 Slotted Truss Head Screw M6 Thread x 8.70mm x Ø14mm Piece
    5 Slotted Truss Head Screw M4 Thread x 8.70mm x Ø8mm Piece
    6 Bearing Nut M6 Thread x 8,70mm, Hardened Piece
    7 Bearing Nut M4 Thread x 8,70mm, Hardened Piece
    8 Phillips Oval Countersunk Head Screw M5 Thread x 4mm, Ø8mm Piece

    Type-10: Knee Joint w/ Bale Lock

    E 02s
    Item Material Witdh Side Description Qty.
    OKJ130-10-16R Stainless Steel 16 mm Right Straight & Straight Pair
    OKJ130-10-16L Stainless Steel 16 mm Left Straight & Straight Pair
    OKJ130-10-20R Stainless Steel 20 mm Right Straight & Straight Pair
    OKJ130-10-20L Stainless Steel 20 mm Left Straight & Straight Pair

    Type-20: Knee Joint w/ Bale Lock

    E 02s
    Item Material Witdh Side Description Qty.
    OKJ130-20-16R Stainless Steel 16 mm Right Straight & Contoured Pair
    OKJ130-20-16L Stainless Steel 16 mm Left Straight & Contoured Pair
    OKJ130-20-20R Stainless Steel 20 mm Right Straight & Contoured Pair
    OKJ130-20-20L Stainless Steel 20 mm Left Straight & Contoured Pair

    Type-30: Knee Joint w/ Bale Lock

    E 02s
    Item Material Witdh Side Description Qty.
    OKJ130-30-16R Stainless Steel 16 mm Right Straight & Contoured Pair
    OKJ130-30-16L Stainless Steel 16 mm Left Straight & Contoured Pair
    OKJ130-30-20R Stainless Steel 20 mm Right Straight & Contoured Pair
    OKJ130-30-20L Stainless Steel 20 mm Left Straight & Contoured Pair

    Knee Joint w/Ring Lock: Parts

    E 02s
    No Part Feature Qty
    1 Upper Section Stainless Steel Piece
    2 Lower Section Stainless Steel Piece
    3 Ring Stainless Steel Piece
    4 Two Hole Screw M6 Thread x 7.30mm x Ø12mm Piece
    5 Bearing Nut M6 Thread x 7.30mm, Hardened Piece
    6 Phillips Oval Countersunk Head Screw M5 Thread x 4 mmx Ø8mm Piece

    Type-10: Knee Joint w/ Ring Lock

    E 02s
    Item Material Witdh Side Description Qty.
    OKJ140-10-16R Stainless Steel 16 mm Right Straight & Straight Pair
    OKJ140-10-16L Stainless Steel 16 mm Left Straight & Straight Pair
    OKJ140-10-20R Stainless Steel 20 mm Right Straight & Straight Pair
    OKJ140-10-20L Stainless Steel 20 mm Left Straight & Straight Pair

    Type-20: Knee Joint w/ Ring Lock

    E 02s
    Item Material Witdh Side Description Qty.
    OKJ140-20-16R Stainless Steel 16 mm Right Straight & Contoured Pair
    OKJ140-20-16L Stainless Steel 16 mm Left Straight & Contoured Pair
    OKJ140-20-20R Stainless Steel 20 mm Right Straight & Contoured Pair
    OKJ140-20-20L Stainless Steel 20 mm Left Straight & Contoured Pair

    Type-30: Knee Joint w/ Ring Lock

    E 02s
    Item Material Witdh Side Description Qty.
    OKJ140-30-16R Stainless Steel 16 mm Right Straight & Contoured Pair
    OKJ140-30-16L Stainless Steel 16 mm Left Straight & Contoured Pair
    OKJ140-30-20R Stainless Steel 20 mm Right Straight & Contoured Pair
    OKJ140-30-20L Stainless Steel 20 mm Left Straight & Contoured Pair

    Lateral Bar Set

    E 02s
    No Part Feature Qty.
    1 Lower Side Bar 410mm length, 4mm thickness Piece
    2 Upper Side Bar 450mm lenght, 4mm thickness Piece
    Item Material Witdh Qty.
    OLB110-16 Stainless Steel 16 mm Set
    OLB110-20 Stainless Steel 20 mm Set

    Side Bar Set for Carbon Orthosis

    E 02s
    Item Material Witdh Feature Qty.
    OLB120-16 Stainless Steel 16 mm 80mm length, 4mm thickness Set
    OLB120-20 Stainless Steel 20 mm 80mm length, 4mm thickness Set

    Ankle Joint: Parts

    E 02s
    No Part Feature Qty
    1 Joint Stainless Steel Piece
    2 Slotted Truss Head Screw M5 Thread x 6.50 mm x Ø12 mm (for 16mm) M6 Thread x 7.30 mm x Ø14 mm (for 20mm) Piece
    3 Bearing Nut M5 Thread x 6.50 mm, Hardened (for 16mm) M6 Thread x 7.30 mm, Hardened (for 20mm) Piece
    4 Phillips Oval Countersunk Head Screw M5 Thread x 4 mm x Ø8 mm Piece

    Type-10 | Ankle Joint

    E 02s
    Item Material Witdh Side Description Qty.
    OAJ110-10-16R Stainless Steel 16 mm Right Straight & Straight Pair
    OAJ110-10-16L Stainless Steel 16 mm Left Straight & Straight Pair
    OAJ110 -10-20R Stainless Steel 20 mm Right Straight & Straight Pair
    OAJ110 -10-20L Stainless Steel 20 mm Left Straight & Straight Pair

    Type-20 | Ankle Joint

    E 02s
    Item Material Witdh Side Description Qty.
    OAJ110 -20-16R Stainless Steel 16 mm Right Straight & Contoured Pair
    OAJ110 -20-16L Stainless Steel 16 mm Left Straight & Contoured Pair
    OAJ110 -20-20R Stainless Steel 20 mm Right Straight & Contoured Pair
    OAJ110 -20-20L Stainless Steel 20 mm Left Straight & Contoured Pair

    Type-30 | Ankle Joint

    E 02s
    Item Material Witdh Side Description Qty.
    OAJ110 -30-16R Stainless Steel 16 mm Right Straight & Contoured Pair
    OAJ110 -30-16L Stainless Steel 16 mm Left Straight & Contoured Pair
    OAJ110 -30-20R Stainless Steel 20 mm Right Straight & Contoured Pair
    OAJ110 -30-20L Stainless Steel 20 mm Left Straight & Contoured Pair

    Foot Stirrup

    E 02s
    Item Material Witdh Length from Center Thickness Qty.
    OKJ120-16 Stainless Steel 16 mm 145 mm 2.5mm Set
    OKJ120-20 Stainless Steel 20 mm 160 mm 3 mm Set

    Hip Joints

    E 02s
    Item Material Weight Wideness Weight Limit
    HJ-100 Stainless Steel 162 gr 32mm 125 kg
    HJ-200 Stainless Steel 128 gr 25 mm 100 kg